1991 Ford F-250 Radiator filler neck

1991 FORD F-250
91,000 MILES
Avatar
TERRANCEMICEK
  • MEMBER
  • 2 POSTS
2 inch Radiator filler neck has two outlet holes between radiator cap and main body of the radiator. Top hole 1/4 inch hose is connected to coolant overflow tank. Bottom hole, about 1/2 inch below the top hole isn't connected to anything?? When radiator is hot radiator fluid pours out of bottm hole and onto everything beneath. This can't be right, can it?
Aug 28, 2013 at 9:20 AM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
no it can't be right does this have a diesel in it? if this has no hose connection to go to it, then go to an auto parts and get a nipple then clamp it in place you should be ok with that then.
Aug 28, 2013 at 9:32 AM
Avatar
TERRANCEMICEK
  • MEMBER
  • 2 POSTS
Thank you. p.s. it is not a deisel.
Aug 28, 2013 at 10:19 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.