instrument panel light

did ya get it? try this.

Instructions
Things You'll Need

OBD I scan tool

1

Insert the cable from the OBD I scan tool into the diagnostic port located to the left of the steering column below the dashboard.
2

Turn the ignition switch to the "ON" position without starting the engine.
3

Press the power button on the OBD I scan tool if it does not come on automatically.
4

Press the "scan" button on the scan tool if the scan does not start automatically. Wait for the scan to complete.
5

Press the "clear" or "erase" button on the scan tool to clear the maintenance required light.
6

Turn the scanner off. Disconnect the cable from the diagnostic port.