Havpro see if you are getting a signal form VSS it may be a bad dash/speedo
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
-1
Saturday, December 6th, 2014 AT 2:27 PM
FRANK TEIXIDO
MEMBER
9 POSTS
It was the first thing I changed and is not the problem,
the problem is the ecm,
a friend has left me yours to try and with it no problem.
Was this
answer
helpful?
Yes
No
Sunday, December 7th, 2014 AT 2:59 AM
FRANK TEIXIDO
MEMBER
9 POSTS
Electrical problem with ECM
how to get a list of components?
Is a component marked as RV and do not know which components are
puts GEES 5034, not if they are tantalum and that value.
How to get a list of components?
How to get the schematic?
Was this
answer
helpful?
Yes
No
Sunday, December 7th, 2014 AT 3:11 AM
HMAC300
MECHANIC
48,601 POSTS
Best bet for a diagram is to rent a manual and go from there. It may be antoher module besides the ecm so don't count that out right away. Besides your ecm has what is called a prom inside and it may be that that is screwing up on you. The prom is removable and are no longer available.
Was this
answer
helpful?
Yes
No
Sunday, December 7th, 2014 AT 6:21 AM
FRANK TEIXIDO
MEMBER
9 POSTS
The prom used always have to be the same for correct year but with another ecm then it works perfectly.
It is the ecm definitely the problem.
How to get a list of components?
How to get the schematic?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, December 7th, 2014 AT 10:13 AM
HMAC300
MECHANIC
48,601 POSTS
Younever get a schematic of the ecm only it's ports. Like I said in first reply rent a manual then you can print it out we can't make them large enough for you to read them
Was this
answer
helpful?
Yes
No
Sunday, December 7th, 2014 AT 4:05 PM
FRANK TEIXIDO
MEMBER
9 POSTS
Rent a manual
Where I can rent the manual?
Was this
answer
helpful?
Yes
No
Monday, December 8th, 2014 AT 3:06 AM
HMAC300
MECHANIC
48,601 POSTS
Look on our site under how to repair manualsyou can print off whatever you need or rent it for a week
Was this
answer
helpful?
Yes
No
Monday, December 8th, 2014 AT 7:04 AM
FRANK TEIXIDO
MEMBER
9 POSTS
Get a list of components ECM?
Was this
answer
helpful?
Yes
No
Tuesday, December 9th, 2014 AT 2:06 AM
HMAC300
MECHANIC
48,601 POSTS
Ecm components are never listed I h ave no further comments or suggestions.