Car wont start

There are a number of things that can cause this. However, we need to start with the four inputs to the ECU that could shut this down.

Take a look at the wiring diagram below and let's check power going into the ECU and find out what we have.

https://www.2carpros.com/articles/how-to-check-wiring

https://youtu.be/dCjmRL3p4Cs

When you say you replaced the crank and pickup, I am assuming you are talking about the part attached below. If that is the case, then we need to remove it and inspect the pick-up tone wheel on the cam pulley. Basically, we need to find out if this is cracked or has another issue.

Please see the detail below and let us know what you find with this. Thanks