Advertisement

Automatic transmission shift stalling engine

237 MILES • 4 CYL • 2WD • AUTOMATIC
Avatar
PLAWLOR02
  • MEMBER
  • 1 POST
Hello,

Vehicle- 1991 Acura Integra LS Coupe automatic with 237 miles on the chasis.

Recently, was repairing and replacing my Thermostat. I removed my Distributor in order o get to it. I believe i replaced it properly.

Here's the problem.
The automatic transmission shift lever usually has a delay after the vehicle is driven and in park. It usually takes 30-60 secs before the S3 moves to P even after i have shifted into park. Now, the problem is that it even wants to shift while I am driving. I think one of the relays are out.
Either the Automatic Transaxle Interlock control unit, the Automatic Transaxle control unit, or the main computer...

I cannot drive the car more than 1 block before the Yellow check engine light comes on, while the Automatic shift lever starts making a 'CLICKING Sound

Then, it has a hard time starting because the automatic shift lever shows that it is in Park and S3 and the same time.

May 16, 2011 at 2:32 PM
Advertisement
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
have the car scanned for codes, an auto part store won't be able to do this as it may be a trans problem and most auto parts stores only pick up engine codes. Especially since your service light is coming on.
May 16, 2011 at 3:40 PM
Advertisement
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle