performance

1990 PONTIAC TRANSPORT
193,000 MILES • 6 CYL • FWD • AUTOMATIC
Avatar
CAPTIANVIN
  • MEMBER
  • 2 POSTS
90 pontiac transport 3.1 CODE 44 and no other codes lean burn,and it is really is burning lean,Idles rough,no power at all.The the problem seemed to start after evap was installed (dash was removed) Fuel press is okay,no exhaust leaks timing set all grounds and power supplys was checked,new PCM ,New O2, New map,Yiming chainhas no slack, New injectors,newplugs,new wires. cap,and rotor.GET this when load is placed on charging system or alt is disconected either by disconecting the plug or, disconected bat wire or removing belt the problem totally disapears and runs perfect.so new alt was installed but still same problem.
Jul 13, 2011 at 3:36 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
RASMATAZ
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 75,992 POSTS
Lean fuel condition could be caused by one of the following below:

1.Vacuum leaks
2.EGR and PCV valve.
3.Low fuel pressure.
4.Dirty fuel injectors.
5.Mass Air Flow Sensor.
6.Oxygen Sensor.
Jul 13, 2011 at 5:10 AM
Advertisement