SPONSORED LINKS

My ponitac 6000 with a 3.1 wont start, it just trys to turn over and wont

Tiny
SEAGLE
  • MEMBER
  • 1990 PONTIAC 6000
My pontiac 60003.1 wont start
i have installed a new fuel pump and fuel filter and new starter and it still wont crank
Tuesday, September 6th, 2011 AT 2:19 PM

3 Replies

Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
If it cranks good, but, won't start, have a helper crank it, while you check for spark at the plugs. If you have spark everywhere, use a gage and check fuel pressure. Any applicable trouble codes? How long since over-all tune-up?

If the starter itself won't crank, make sure the battery has a full charge, check the starter wiring circuit.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Tuesday, September 6th, 2011 AT 3:15 PM
Tiny
R.HARLEY
  • MEMBER
  • 1 POST
If it is turning over and sounds like it wants to start. Remove coil wire from distributor hold with insulated pliers; close to the distributor and see if it starts then. I have a 1986 Pontiac 6000, 2.8, and that is the only way it will start and run, still waiting for an answer as to why.
Was this
answer
helpful?
Yes
No
Monday, November 28th, 2011 AT 9:27 PM
Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
Was the ignition module ever tested?
Was this
answer
helpful?
Yes
No
Wednesday, December 14th, 2011 AT 6:41 PM

Please login or register to post a reply.

Related Engine Not Running Content

How to fix an engine that wont start
VIDEO
How to fix an engine that wont start
Instructional repair video
Engine Not Starting
GUIDE
Engine Not Starting
Over the past 20 years at 2CarPros we have identified the top problems that are easily fixed. This guide can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE

Sponsored links