fuel injectors

1990 PLYMOUTH LASER
4 CYL • FWD • MANUAL
Avatar
JRDARING
  • MEMBER
  • 8 POSTS
Help !!!!!
IM getting power on both side of the injectors on all four of them is this right.From what i was told one side should be power and one side should be a ground.........
Nov 30, 2010 at 11:40 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
RASMATAZ
  • CAR REPAIR CONTRIBUTOR
  • 75,992 POSTS
Are you checking for power while injectors are plug-in? The injector wiring is shorted out if you're checking while its off

You should have one side of the injector harness with battery voltage-

An injector could be shorted out and dragging the down rest
Nov 30, 2010 at 11:47 PM
Advertisement
Avatar
JRDARING
  • MEMBER
  • 8 POSTS
They are new injectors... im not check them while there on the injectors...do u know what side is power and what would cause this to happen ..... thank u
Nov 30, 2010 at 11:54 PM