1990 Mitsubishi Eclipse engine doesn't have any spark

Tiny
2CP-ARCHIVES
  • MEMBER
  • 1990 MITSUBISHI ECLIPSE
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 127,000 MILES
1990 Mitsubishi Eclipse GS 2.0 mileage: 127,000. My engine doesn't have any spark. I replaced the PCM module, crankshaft, camshaft sensor, wiring checked and grounds. The car will not run.
Wednesday, November 10th, 2010 AT 8:32 PM

2 Replies

Tiny
2CP-ARCHIVES
  • MEMBER
  • 4,540 POSTS
Here are some things to have checked: 1. Check to see if the timing belt/chain has failed, 2. Check for ignition spark at spark plugs, 3. Check for fuel pressure, 4. Scan P.C.M. (Computer) for fault or error codes. The information should pinpoint the mal functioning components.
Was this
answer
helpful?
Yes
No
Wednesday, November 10th, 2010 AT 8:34 PM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
No snapping blue spark continue to troubleshoot the ignition system-power input to the coil/coil packs, coil's resistances, cap and rotor, distributor pick-up coil, ignition control module, cam and crank sensors and computer Note: If it doesn't apply disregard it and keep testing
Was this
answer
helpful?
Yes
No
Friday, November 12th, 2010 AT 11:16 AM

Please login or register to post a reply.

Sponsored links