1990 Isuzu Truck cylinder lock

1990 ISUZU TRUCK
82,000 MILES • 2.6L • 4 CYL • 2WD • MANUAL
Avatar
BRASSMAN
  • MEMBER
  • 1 POST
how to remove old cylinder lock
key will not turn on in cylinder Trying to replace cylinder lock, but I can't get old cylinder out.
Need help on removing old cylinder. How do I remove it.
I was told by auto parts sales person that cylinder or key could be worn out. When the key is in cylinder the cylinder is very loose and wobbly.
Jan 23, 2014 at 3:58 PM
Advertisement
Avatar
MLDANIELS2000
  • ✓ASE Certified Mechanic
  • 227 POSTS
  • ASE Certified Mechanic
Disconnect negative battery cable. Remove column shrouds and lower instrument panel trim panel. Disconnect ignition switch 6-wire and 2-wire harness connectors and remove tie-straps retaining harness to column. Remove ignition switch retaining screw from ignition switch/column lock assembly. See Fig 1 . Remove ignition switch. To install, reverse removal procedure. Ensure proper operation of steering lock and ignition switch mechanism.
Image (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Jan 23, 2014 at 8:51 PM
Avatar
MLDANIELS2000
  • ✓ASE Certified Mechanic
  • 227 POSTS
  • ASE Certified Mechanic
Did the diagrams help?
Jan 27, 2014 at 11:54 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.