1990 Honda Accord Ignition Output Signal

1990 HONDA ACCORD
2.2L • 4 CYL • FWD • MANUAL
Avatar
STICKS661KC
  • MEMBER
  • 1 POST
I have a 1990 honda accord ex 5spd with aftermarket msd ignition system & msd modified distributor cap for external coil. I was driving it one day when i noticed it started running rough so i pull off the road n opened the hood while the car was still running when i noticed one of my spark plug wires had came loose from the distributor cap n noticed that i could see the spark from my distributor cap jump to my cold air intake n onto the ground body of my car. So i turned it off to avoid being shocked n put the spark plug wire back onto the cap n when i try to start the car it kept cranking over but wouldnt start. I have replaced distributor,ignitor, checked all fuses n still cant get it to start. I keep getting code 15(ignition output signal) from ecu but cant seem to find the problem even after replacing the ecu. Can someone please help me with this problem? Thanks in advance
Mar 24, 2015 at 9:13 AM
Advertisement
Avatar
HMAC300
  • ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
see pic for diagnosis...
Mar 24, 2015 at 9:27 AM
Avatar
STICKS661
  • MEMBER
  • 1 POST
Thank u i will definitely check those relays n see wut happens. I will let u kno wut happens after that k.
Apr 3, 2015 at 1:40 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.