Truck won't start

Tiny
MTREVINO
  • MEMBER
  • 1990 GMC SIERRA
The starter and the battery are good but it wont turn over. I think it may be the ignition switch but not sure how to get to it to pull it and replace it.
Monday, January 31st, 2011 AT 12:26 AM

1 Reply

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
There is a fusible link that cold be blown, it is between the battery and junction block on the truck. It could also be your neutral safet switch if an automatic aor clutch switch if manual. Those have to be checked to see if they are getting power or not. The fusible llink is black/red andthe nuetral switch wire is purple.
Was this
answer
helpful?
Yes
No
-1
Monday, January 31st, 2011 AT 1:11 AM

Please login or register to post a reply.

Sponsored links