air hissing noise coming from brake pedal

1990 FORD TRANSIT
MANUAL
Avatar
SCOTTSCOTT*SCOTT
  • MEMBER
  • 4 POSTS
i av a ford transit tipper, and when i kicked my van in last night ther was an hissing noise like air coming from the brake pedal and when i pushed my brake pedal down it stopped .wot could this be? thanx
Nov 30, 2010 at 7:16 PM
Advertisement
Avatar
CARADIODOC
  • ASE Certified Mechanic
  • 34,321 POSTS
  • ASE Certified Mechanic
Leaking diaphragm in the power booster.

caradiodoc
Nov 30, 2010 at 7:27 PM
Avatar
STRAILER
  • ASE Certified Mechanic
  • 54,840 POSTS
  • ASE Certified Mechanic
The brake booster will need to be replaced. Thanks for using 2Carpros.com
Nov 30, 2010 at 7:33 PM
Avatar
SCOTTSCOTT*SCOTT
  • MEMBER
  • 4 POSTS
fanx will my brakes fail on me,and can i do the repair myself if so is it easy 2 do or not? and do u no how much a diaphragm will cost fanx
Nov 30, 2010 at 7:34 PM
Avatar
SCOTTSCOTT*SCOTT
  • MEMBER
  • 4 POSTS
hi is this dangerous like will my brakes fail,i put my hand around the rubber at the back ov the pedal and it stopped hissing so is it still that problem or not? also i pushed n pulled my brake pedal and the hissing stopped wen i pulled and pushed. . .is it dear to replce the booster and can i do it myself thanx
Nov 30, 2010 at 7:43 PM
Avatar
CARADIODOC
  • ASE Certified Mechanic
  • 34,321 POSTS
  • ASE Certified Mechanic
You should be able to do it yourself but on some trucks it can be hard to get to some of the nuts. There will be two nuts holding the master cylinder to the booster and typically four nuts under the dash holding the booster to the firewall. Pay close attention to how the push rod is attached to the brake pedal and if the brake light switch is attached there too.

It might be easier to get a used booster from a salvage yard first so you can look at it to see how it is mounted.

caradiodoc
Nov 30, 2010 at 7:56 PM
Avatar
CARADIODOC
  • ASE Certified Mechanic
  • 34,321 POSTS
  • ASE Certified Mechanic
You will still have brakes but the pedal might be hard to press. Only the power assist function will be lost.

caradiodoc
Nov 30, 2010 at 8:01 PM
Avatar
SCOTTSCOTT*SCOTT
  • MEMBER
  • 4 POSTS
thanx for both ov ur advices u av been very helpful,i am goin av a look at 1 frm a salvage yard first so i can see how it is mounted before i touch my own thank you both very much
Nov 30, 2010 at 8:09 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.