no overdrive a4ld

1990 FORD RANGER
Avatar
DJM76@JUNO.COM
  • MEMBER
  • 11 POSTS
Just rebuilt my a4ld transmission I don't have overdrive, my 3-4 solenoid is good but my lockup solenoid is bad could this be why I don't have overdrive?
Oct 14, 2012 at 9:33 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
yes it could. what is the ohm reading on the solenoid??

Roy
Oct 14, 2012 at 9:49 PM
Avatar
DJM76@JUNO.COM
  • MEMBER
  • 11 POSTS
both solenoids have 26.3 ohms but when I power them the 3-4 solenoid makes a clicking noise and the lockup has nothing
Oct 14, 2012 at 10:09 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
check the wiring. ohm out all wires

Roy
Oct 14, 2012 at 10:27 PM
Avatar
DJM76@JUNO.COM
  • MEMBER
  • 11 POSTS
The wiring goes in the solenoids and I have them out of the valve body I checked the ohms by touching the wires with my ohm meter and I got 26.3 ohms on each one
Oct 14, 2012 at 11:25 PM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
when you apply 12 volts, does the overdrive solenoid click???

Roy
Oct 15, 2012 at 12:09 AM
Avatar
DJM76@JUNO.COM
  • MEMBER
  • 11 POSTS
yes it does
Oct 15, 2012 at 4:39 AM