1990 Ford Ranger low air flow

Tiny
CTURNER1001
  • MEMBER
  • 1990 FORD RANGER
  • 2.9L
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 200,000 MILES
I have replaced blower motor, and the blower motor resistor and plug, and with ac or heat there is hardly any air flow
Saturday, July 11th, 2015 AT 5:53 PM

3 Replies

Tiny
CJ MEDEVAC
  • MECHANIC
  • 11,004 POSTS
A DOOR INSIDE THE UNIT MAY BE BROKEN/ STUCK/ OR IT'S ACTUATOR IS NOT WORKING

THE MEDIC
Was this
answer
helpful?
Yes
No
Saturday, July 11th, 2015 AT 7:46 PM
Tiny
CTURNER1001
  • MEMBER
  • 1 POST
Nope all working properly
Was this
answer
helpful?
Yes
No
Sunday, July 12th, 2015 AT 1:03 PM
Tiny
CJ MEDEVAC
  • MECHANIC
  • 11,004 POSTS
THIS WAS THE INITIAL REASON FOR THE PARTS CHANGING?

THIS WAS A SUDDEN OCCURRENCE HAPPENING? (BEFORE OR AFTER THE NEW PARTS)

ON THE HIGH SETTING, DOES MR. BLOWER SEEM TO BE TURNING AS FAST AS IT SHOULD? (SOUND WISE)

THE SQUIRREL CAGE FIT TIGHTLY TO THE BLOWER MOTOR? (NOT SLIPPING)

SQUIRREL CAGE SEATED ALL OF THE WAY DOWN, AND IS NOT SCRUBBING ON THE HOUSING?

HAS ANY OF THE WIRES BEEN SWAPPED/ CUT/ MESSED WITH?

THE MEDIC
Was this
answer
helpful?
Yes
No
Sunday, July 12th, 2015 AT 1:40 PM

Please login or register to post a reply.

Sponsored links