Instrument cluster wiring

1990 FORD RANGER
99,342 MILES • 2.3L • 4 CYL • 4WD • MANUAL
Avatar
JEFF TURNER
  • MEMBER
  • 1 POST
I was needing a diagram with the wire location & colors of the plug on the instrument cluster in order to locate which wire comes from the coolant temp sending unit. Any help would be greatly appreciated
Jul 31, 2015 at 8:54 PM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
Hello,

Here is a wiring diagram of the cluster below check out the pic - blu/black wire. Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Image (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Aug 1, 2015 at 6:41 AM
Avatar
RICK WILLHITE
  • MEMBER
  • 5 POSTS
This is the diagram I referred to. I checked this fuse (17) by eye and meter, and it checks good. Anything else? Thank You VERY much for the assistance. Rick
Jan 18, 2025 at 11:00 AM
Avatar
STRAILER
  • ✓ASE Certified Mechanic
  • 54,832 POSTS
  • ASE Certified Mechanic
Yes, the wiring color is blk/ dr blu if you replaced the sensor, and the wire is good you will need to replace the gauge cluster if both fuses are good, and the cluster is grounded.
Jan 21, 2025 at 9:31 AM
Avatar
RICK WILLHITE
  • MEMBER
  • 5 POSTS
I checked the #7 fuse. Which other is there? Thanks for the assistance, Rick
Jan 23, 2025 at 10:00 AM
Avatar
STRAILER
  • ✓ASE Certified Mechanic
  • 54,832 POSTS
  • ASE Certified Mechanic
Yes, please check fuse# 13 and 17.
Jan 23, 2025 at 11:17 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.