SPONSORED LINKS

1990 Ford Ranger air flow

Tiny
GUNNERMUD
  • MEMBER
  • 1990 FORD RANGER
  • 2.9L
  • 6 CYL
  • 4WD
  • MANUAL
  • 835,043 MILES
I put a new blower motor and heating parts I got great heat but the only thing wrong is my air flow is really low and I cheeked all the vents and doors there all fine and my heater core is clean what am I missing
Wednesday, December 24th, 2014 AT 1:21 AM

1 Reply

Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
If you had to splice wires to install the blower motor you may have reversed them which would make the blower revolve in the opposite direction. If that's not the case. Compare the old squirrel cage to the new one and make sure the fins go the same direction.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Wednesday, December 24th, 2014 AT 2:08 AM

Please login or register to post a reply.

Related Heater Heater Core Content

Heater Core Replacement
GUIDE
Heater Core Replacement
A heater core is positioned inside the car and is part of the HVAC system. Hot engine coolant is run through the core which air is blown through via the blower motor which ...
VIEW MORE

Sponsored links