Fuel leak

CLEM&ANGIE

MEMBER
1990 DODGE RAM
V8
2WD
AUTOMATIC

1990 dodge ram 5.2 changed out fuel filter now lines are leaking but two ends are pressed on how to fix.

Sunday, August 7th, 2011 AT 4:43 PM

3 Replies

CARADIODOC

MECHANIC
33,916 POSTS

Replace the rubber hoses and use fuel injection hose clamps. Those are metal bands that won't cut into the rubber like worm gear clamps do.

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

-1

Sunday, August 7th, 2011 AT 9:39 PM

CLEM&ANGIE

MEMBER
2 POSTS

I get that so what do I you about the pressed on side of the fuel lines that go to the fuel filter.

Was this

answer

helpful?

Yes

No

Sunday, August 7th, 2011 AT 11:04 PM

CARADIODOC

MECHANIC
33,916 POSTS

Are you referring to a quick-connect fitting? I can't tell from the picture I found what the center hose connection looks like. If that's a quick-connect fitting, similar to an air hose coupler, the dealer has repair kits for those. You'll get two fittings that are curved and two that are straight. You only use the one or two you need.

Those fittings don't typically leak; they usually won't release and they have to be cut off. The spring inside gets rusty. I like to spray some "Spray White Lube" in there after it's connected to keep that from happening again.

Was this

answer

helpful?

Yes

No

-1

Monday, August 8th, 2011 AT 12:24 AM