Sometimes dies and fails to start go back to it later and it will start. Replaced starter and switch, relay, battery and e.C.M.
Friday, January 13th, 2012 AT 9:39 PM
3 Replies
JDL
MECHANIC
16,098 POSTS
When the problem occurs, are you saying it cranks good but won't start or it won't even crank? Any applicable trouble codes?
If it won't even crank, check the starter circuit. Any testing, make sure the tranny is in park or neutral and the e-brake is set. Do you have a security system on this?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, January 13th, 2012 AT 9:47 PM
DON BROWN BUTTHOLE
MEMBER
2 POSTS
It will not crank, it flashes no codes, has a new starter relay in it, have checked starter circuit, tranny is in park, no security system.
Was this
answer
helpful?
Yes
No
Friday, January 13th, 2012 AT 10:46 PM
JDL
MECHANIC
16,098 POSTS
Cranking is starter action. Has to be an issue with starter circuit, somewhere. Or the engine is siezed? Can you turn the crank by hand?