1990 Cadillac Allante Window switch on passenger side

1990 CADILLAC ALLANTE
90,000 MILES
Avatar
CREVARTS1
  • MEMBER
  • 1 POST
I put the switch in on drivers side and the window on th passenger side will not roll up or down. I need to know how to pop the switch out on the passenger side. When I first installed the drivers side switch the passenger side worked 2or 3 times and then quit working.
Jun 27, 2013 at 5:06 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
CARADIODOC
  • CAR REPAIR CONTRIBUTOR
  • 34,308 POSTS
First look for broken or frayed wires between the door hinges.
Jun 27, 2013 at 5:17 PM
Advertisement
Avatar
APERRONE
  • MEMBER
  • 1 POST
Pry it up from the arm rest with a flat putty knife or equivalent. Place the tool blade in the space between the arm rest and the back of the switch. Pry up by laying the flat part of the putty knife on the arm rest and pushing the handle down. The switch is not held in place by any screws or other fasteners. There is only a spring clip.
Feb 12, 2015 at 7:25 PM