1990 Cadillac Allante Window switch on passenger side

Tiny
CREVARTS1
  • MEMBER
  • 1990 CADILLAC ALLANTE
  • 90,000 MILES
I put the switch in on drivers side and the window on th passenger side will not roll up or down. I need to know how to pop the switch out on the passenger side. When I first installed the drivers side switch the passenger side worked 2or 3 times and then quit working.
Thursday, June 27th, 2013 AT 5:06 PM

2 Replies

Tiny
CARADIODOC
  • MECHANIC
  • 33,873 POSTS
First look for broken or frayed wires between the door hinges.
Was this
answer
helpful?
Yes
No
Thursday, June 27th, 2013 AT 5:17 PM
Tiny
APERRONE
  • MEMBER
  • 1 POST
Pry it up from the arm rest with a flat putty knife or equivalent. Place the tool blade in the space between the arm rest and the back of the switch. Pry up by laying the flat part of the putty knife on the arm rest and pushing the handle down. The switch is not held in place by any screws or other fasteners. There is only a spring clip.
Was this
answer
helpful?
Yes
No
+1
Thursday, February 12th, 2015 AT 7:25 PM

Please login or register to post a reply.

Related Window Switch Replace/Remove Content

Window Switch Replacement and Test
VIDEO

Sponsored links