the car needs a new water pump, i went to a couple places and its told to 1.6 hours of a job, i want to know how to do it myself.
Dec 13, 2011 at 10:22 PM
how to replace a water pump on a 1989 oldsmobile touring sedan 98 model?
1989 OLDSMOBILE 98
SHYUCESS
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Disconnect battery ground cable and drain cooling system.
Remove drive belts and disconnect radiator hoses and heater hoses from pump.
Remove water pump pulley attaching bolts, Fig. 28. The long bolt is accessed through hole in body side rail. Remove pump pulley.
Remove water pump attaching bolts and the water pump.
Reverse procedure to install.
good luck
Roy
Remove drive belts and disconnect radiator hoses and heater hoses from pump.
Remove water pump pulley attaching bolts, Fig. 28. The long bolt is accessed through hole in body side rail. Remove pump pulley.
Remove water pump attaching bolts and the water pump.
Reverse procedure to install.
good luck
Roy
Dec 13, 2011 at 10:25 PM
Advertisement