SPONSORED LINKS

New clutch stopped working went to floor why

Tiny
JOEG69
  • MEMBER
  • 1989 NISSAN SENTRA
  • 75 MILES
Put a new clutch in my 89 nissan sentra 1.6 5speed an it worked for 20 minutes now the arm on the trans is moved an it made a pop noise an is to far forward now why?
Monday, August 13th, 2012 AT 12:17 AM

3 Replies

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
The fork has come off the bellhousing inside the clutch. Remove the boot on the side and look in to verify.

Roy
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, August 13th, 2012 AT 12:46 AM
Tiny
JOEG69
  • MEMBER
  • 5 POSTS
Yeah thats funny I thought the same thing an ty but no boot on this tranny wish there was I have to pull the whole tranny back out the clips for the throw out bearing must of come loose an let the bearing earss move what a bummer but again ty
Was this
answer
helpful?
Yes
No
Monday, August 13th, 2012 AT 11:51 AM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Yep, I agree. Good luck

Roy
Was this
answer
helpful?
Yes
No
Monday, August 13th, 2012 AT 12:01 PM

Please login or register to post a reply.

Related Transmission Clutch Not Working Content

Clutch Not Working
GUIDE
Clutch Not Working
Experiencing clutch failure can be a frustrating issue for any driver. A non-working clutch in a standard (manual) transmission can stem from a variety of issues. We created...
VIEW MORE

Sponsored links