SPONSORED LINKS

Transmission issues

Tiny
BRENT
  • MEMBER
  • 1989 MAZDA 626
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 179,995 MILES
1989 626 automatic, lost all gears, no pressure, replaced torque converter (stripped), installed trans and removed pump and check, reinstall, now when take off from stop it shifts into second, goes a ways and downshifts into first and then back into 2nd and stays there, wont shift up from there, doesnt even attempt to. Any ideas?
SPONSORED LINKS
Saturday, November 20th, 2010 AT 2:49 AM

3 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,740 POSTS
Did any metal shavings get into the valve body? Was the TCM checked?
Was this
answer
helpful?
Yes
No
Saturday, November 20th, 2010 AT 3:21 AM
Tiny
BRENT
  • MEMBER
  • 2 POSTS
Actually I dont know, its a friend. He tells me the trans worked fine prior to the converter stripping out. He had the trans in and out 3 times because the converter seal kept leaking. He finally stopped the leak but now has this issue. He did not tear the trans down-he just removed the pump and re-installed it. Is this trans completely computer controlled? If so do I have to have special equipment to run a self test on an 89 model? Thanks for your input!
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, November 22nd, 2010 AT 2:00 AM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,740 POSTS
The trans isn't completely computer controled. I have to be honest. I think metal shavings have gotten into places they shouldn't be. If it stripped, metal has gotten into the trans.
Was this
answer
helpful?
Yes
No
Monday, November 22nd, 2010 AT 2:27 AM

Please login or register to post a reply.

Related Transmission Torque Converter Content

How a Torque Converter Works
GUIDE
How a Torque Converter Works
The torque converter is designed to act as a fluid coupler that can engage and disengage with the increase and decrease of engine rpm. When the vehicle is not in motion...
VIEW MORE

Sponsored links