I need to know were the crankshaft senson is in a 1989 Isuzu Trooper

Tiny
UVI22
  • MEMBER
  • 1989 ISUZU TROOPER
  • 400,000 MILES
The head gasket was change and the timming belt and now the car won't start the car is in time a mechanic told me to check the crankshaft sensor but I can find it can you help me
Wednesday, December 28th, 2011 AT 5:54 PM

12 Replies

Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
If engine 2.6L inside distributor
Was this
answer
helpful?
Yes
No
Wednesday, December 28th, 2011 AT 5:59 PM
Tiny
UVI22
  • MEMBER
  • 11 POSTS
Is a 4 cilynder
Was this
answer
helpful?
Yes
No
Wednesday, December 28th, 2011 AT 6:17 PM
Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
Is there spark at the plugs? Fuel pressure?
Was this
answer
helpful?
Yes
No
Wednesday, December 28th, 2011 AT 6:21 PM
Tiny
UVI22
  • MEMBER
  • 11 POSTS
And yes is 2.6
Was this
answer
helpful?
Yes
No
Wednesday, December 28th, 2011 AT 6:22 PM
Tiny
UVI22
  • MEMBER
  • 11 POSTS
Fuel presure is good the park there's is some I use one of does tester you put in the spark plugs and the ligth came on
Was this
answer
helpful?
Yes
No
Wednesday, December 28th, 2011 AT 6:26 PM
Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
Checked Tbelt makr alignment? And compression?
Was this
answer
helpful?
Yes
No
Wednesday, December 28th, 2011 AT 6:35 PM
Tiny
UVI22
  • MEMBER
  • 11 POSTS
I have done that already there align the car is in time it dosent back fire when you try to start it it just won't turn on don't know what else to do until my friend told me to check the crankshaft sensor
Was this
answer
helpful?
Yes
No
Wednesday, December 28th, 2011 AT 6:49 PM
Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
So have 155+ psi compression and 42 psi fuel pressure. Hook up timing light crank engine does mark show at 10 BTDC?
Was this
answer
helpful?
Yes
No
Wednesday, December 28th, 2011 AT 6:57 PM
Tiny
UVI22
  • MEMBER
  • 11 POSTS
No at 12 BTDC
Was this
answer
helpful?
Yes
No
Wednesday, December 28th, 2011 AT 7:15 PM
Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
Well if you have compression, fuel and spark and in time it should run
Was this
answer
helpful?
Yes
No
Wednesday, December 28th, 2011 AT 7:24 PM
Tiny
UVI22
  • MEMBER
  • 11 POSTS
Yeah I know thanks for your time ill keep at it
Was this
answer
helpful?
Yes
No
Wednesday, December 28th, 2011 AT 7:41 PM
Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
Valves adjusted.008 cold
Was this
answer
helpful?
Yes
No
Wednesday, December 28th, 2011 AT 9:31 PM

Please login or register to post a reply.

Sponsored links