Ran fine Thursday and wouldnt start friday. Is getting fuel and fire, and the compression is fine. What could be wrong?
Feb 12, 2011 at 4:39 PM
Truck won't start
CSOLLE00
- MEMBER
- 1 POST
Advertisement
Use a noid lite, check for injector pulse. It is possible to have fuel and spark, but, without rpm signal, no injector pulse.
Engine cranking, can you see injector spray pattern, TBI? I've seen injector spray patterns that looked good to me,but, when I used a gage and check fuel pressure, the pressure was half of what it should have been.
Engine cranking, can you see injector spray pattern, TBI? I've seen injector spray patterns that looked good to me,but, when I used a gage and check fuel pressure, the pressure was half of what it should have been.
Mar 10, 2011 at 12:33 PM
check for a small magnetic sensor on the trans bell housing it reads the timeing
Mar 10, 2011 at 1:15 PM
I don't believe that sensor applies to distributor ignition.
Mar 12, 2011 at 1:40 PM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.