1989 Ford E-Series Van Won't start

5.0L • V8 • 2WD • AUTOMATIC
Avatar
CRISSYH
  • MEMBER
  • 5 POSTS
After hours upon hours of working on our 1989 Ford Econoline 150 Van, we still are having no luck getting it started. We've replaced the ignition lock and key, ignition switch, starter solenoid, checked the fuses, battery, and we are at a standstill. When we turn the ignition, it doesn't feel like it's engaging. Is there anything else we can do? Any help would be greatly appreciated.
Mar 31, 2014 at 3:47 PM
Advertisement
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
check to see if relay is being engaged then check battery for condition including load test.
Apr 1, 2014 at 12:00 AM
Avatar
CRISSYH
  • MEMBER
  • 5 POSTS
Thank you for your help! We will definately check that also! We were finally able to get it started but only if we bypass the starter solenoid. Any ideas what that could possibly be? We are not sure wiring is done properly, but have been unable to find a wiring diagram for the starter solenoid. I've researched site after site and keep running in circles so far!
Apr 2, 2014 at 4:44 AM
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
I forgot to give you the rest of the answer. check th fusible links in pic. they are connected to the starter relay /solenoid that battery connects to on fender. they are available at auto parts and shold have battery voltage on both sides. a lot of times they only have one wire of the link connected.
Apr 2, 2014 at 5:00 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle