Wheel cylinder removal

Tiny
ROBERT DYKSTRA
  • MEMBER
  • 1989 CHEVROLET S-10
  • 2WD
  • MANUAL
We already took clip and line off but something is still holding cylinder on.
Sunday, December 26th, 2010 AT 7:35 PM

10 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Here is a guide to help you remove the wheel cylinder and a diagram below. Sometimes the wheel cylinder can get stuck you need to tap it with a hammer to break the rust loose.

https://www.2carpros.com/articles/how-to-replace-a-wheel-cylinder

Check out the diagrams (below). Please let us know if you need anything else to get the problem fixed.

Cheers
Was this
answer
helpful?
Yes
No
-1
Tuesday, May 2nd, 2017 AT 4:46 PM
Tiny
PATTY40
  • MEMBER
  • 39 POSTS
  • 1991 CHEVROLET S-10
  • 210,000 MILES
I need to know how to install the ring clip in the wheel cylinder is their a special tool? I am replacing them with brand new wheel cylinders. Just need to know how to install them they have a ring clip.
Was this
answer
helpful?
Yes
No
+6
Tuesday, July 31st, 2018 AT 3:03 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Here you go it shows the tool removing it. Says you can use two awls to remove it.
Was this
answer
helpful?
Yes
No
+7
Tuesday, July 31st, 2018 AT 3:03 PM (Merged)
Tiny
PATTY40
  • MEMBER
  • 39 POSTS
Okay and how to I install the new rings? I really appreciate you helping me.
Was this
answer
helpful?
Yes
No
+11
Tuesday, July 31st, 2018 AT 3:03 PM (Merged)
Tiny
PATTY40
  • MEMBER
  • 39 POSTS
Okay, I got the response on installation so I use a 1 1/8 socket and extension but do I hammer it or what?
Was this
answer
helpful?
Yes
No
+3
Tuesday, July 31st, 2018 AT 3:03 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
No problem that is what we are here for. Also, look next removing the clip I posted how to install it.
Was this
answer
helpful?
Yes
No
-1
Tuesday, July 31st, 2018 AT 3:03 PM (Merged)
Tiny
PATTY40
  • MEMBER
  • 39 POSTS
Yes thanks I just wanted to know do I use a hammer to tap on the extension bar to make the ring snap on?
Was this
answer
helpful?
Yes
No
+1
Tuesday, July 31st, 2018 AT 3:03 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Yes, you drive it into place so you could use a hammer if needed.
Was this
answer
helpful?
Yes
No
Tuesday, July 31st, 2018 AT 3:03 PM (Merged)
Tiny
PATTY40
  • MEMBER
  • 39 POSTS
Okay, thanks I just made a small donation I appreciate your help. Thank you.
Was this
answer
helpful?
Yes
No
Tuesday, July 31st, 2018 AT 3:03 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
You are welcome. That is what were here for. Thank you for the donation.
Was this
answer
helpful?
Yes
No
+3
Tuesday, July 31st, 2018 AT 3:03 PM (Merged)

Please login or register to post a reply.

Sponsored links