No spark Audi 100 2.0e

1989 AUDI 100
155,000 MILES • 5 CYL • 2WD • MANUAL
Avatar
BIGWILLIAM
  • MEMBER
  • 1 POST
I have a 1989 Audi 100 2.0e. It stopped whilst driving last week. HT leads were completely shot and were replaced. This was not the answer have gone on to replace the coil, ignition module and Hall sensor and still no spark at the plug. What else is there left ?? Your suggestions would be gratefully received. Andy
Apr 4, 2011 at 10:28 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
RASMATAZ
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 75,992 POSTS
1989 Audi 100 No spark 2.0e


No snapping blue spark continue to troubleshoot the ignition system-power input to the coil/coil packs,coil's resistances,distributor pick-up coil, ignition control module, cam and crank sensors and computer Note: If it doesn't apply disregard it.
Apr 6, 2011 at 5:24 AM
Advertisement