i have an 88 toyota pickup with a 3.0 v6 that has dropped the passenger side three cylinders.

1988 TOYOTA PICKUP
205,000 MILES
Avatar
MRREDSOXFOSTER
  • MEMBER
  • 1 POST
i have an 88 toyota pickup with a 3.0 v6 that has dropped the passenger side three cylinders. it has spark the injectors function properly in a wire test and the spark plugs are fairly new. the problem started when i replaced the valve cover gaskets and to do that you must remove the intake sump but i am pretty sure i put everything back right but where could i have gone wrong to cause all the passenger side cylinders to drop?
May 22, 2012 at 3:46 AM
Advertisement
Avatar
RASMATAZ
  • ✓ASE Certified Mechanic
  • 75,992 POSTS
  • ASE Certified Mechanic
Hook up a noid lite to each injector on that side and check if its pulsing
May 22, 2012 at 3:58 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.