the turn signal lights on my 1988 rx7 will not come on.the flasher is making the normal flashing sound.the fuse is good. what next?
Feb 21, 2011 at 8:31 PM
turn signal lights
1988 MAZDA RX7
ALAN1212
- MEMBER
- 5 POSTS
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Do hazards work? if no suspect turn signal switch
Feb 21, 2011 at 9:46 PM
Advertisement
I tried a new switch that did not solve my problem
Feb 21, 2011 at 10:23 PM
CPU controls turn signals afetr input from switch
Image (Click to enlarge)
Feb 22, 2011 at 5:43 PM
I replaced the cpu that is the hazard and turn flasher still on lights
Feb 22, 2011 at 9:41 PM
still no lights
Feb 22, 2011 at 10:07 PM
Hazards work? does indicater come on dash? ohm checked wiring frm switch to CPU? was CPU used? what all has been tried?
Images (Click to enlarge)
Feb 23, 2011 at 2:27 PM
The hazards do not work now. The cpu was used and when I put it on the turn signals worked. The next day the turn signals stopped working.
Feb 23, 2011 at 8:53 PM