Advertisement

1988 Jeep Cherokee engine died

218,000 MILES
Avatar
DDC3115
  • MEMBER
  • 1 POST
I was pulling away from a stop sign and the engine died and would not restart. I removed the fuel filter and it was full of fuel and when I blew thru it was not plugged. when I depressed the fuel pressure valve the fuel dribbled out instead of spraying out like on other efi engines. the engine tries to start when key is in the start position and the dies when released to the run position. when the engine tries to run it acts like it is fuel starved. I can hear the fuel pump run when I turn the key on but then it quits after a couple of seconds. this is normal on other efi cars that I have owned but unsure on this one. please help
Nov 20, 2013 at 3:09 PM
Advertisement
Avatar
RASMATAZ
  • ✓Experienced Mechanic
  • 75,988 POSTS
Check the fuel pressure if its within specs and injection pulses from the injectors-let me know what you have
Nov 20, 2013 at 4:01 PM
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,248 POSTS
You need to start by checking to make sure the fuel pump pressure is within the manufacturer's specs. It sounds like it may be working, but may not be producing the pressure needed to run the vehicle.
Nov 20, 2013 at 9:13 PM
Advertisement
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle

Advertisement