i am having fuel injector problems. i have replaced the distributor module, TPS, and the computer itself! tested fuel pressure it primes to about 30 lbs and when i can start the motor it runs at about 36 lbs, when i crank the motor pressure stays about the same but wont start. so i hook my noid lights up and they aren't flashing when i crank but if i prime the intake and start the engine the noid will flash! have checked all my grounds, check all my relays and fuses. i just am out of ideas and would very much appreciate any help or advice.
Dec 8, 2012 at 12:13 PM
