checked all fuses and blubs
Feb 4, 2012 at 8:14 PM
87 toyato camry has no brake lights but has running lights and turn singles
JOSH 85
- MEMBER
- 24 POSTS
check brake light switch at top of brake pedal, start here.
Feb 4, 2012 at 8:17 PM
unpluged brake switch and still no lights 1 wire on switch harness is hot thats it
Feb 4, 2012 at 8:24 PM
do you get power through the switch with it down, if not it will be faulty.
Feb 4, 2012 at 8:26 PM
changed brake lamp failure box still nothing
Feb 4, 2012 at 8:27 PM
souldint the lights work with the switch unhooked
Feb 4, 2012 at 8:28 PM
Check for power at the fuse, and then work back down the line looking for a fault.
Feb 4, 2012 at 8:28 PM
got any ideal
Feb 4, 2012 at 8:30 PM
the plug in has 4 wires how many should be hot
Feb 4, 2012 at 8:32 PM
There are 4 wires, 2 for the brake light circuit and 2 for the cruise control.
Unplugging the connector would not make the lights work. You need to bridge the Green/Red (hot at all times) and the Green/white wire.
The cruise control system wires would be hot only when the cruise control and ignition switch is turned on.
Unplugging the connector would not make the lights work. You need to bridge the Green/Red (hot at all times) and the Green/white wire.
The cruise control system wires would be hot only when the cruise control and ignition switch is turned on.
Image (Click to enlarge)
Feb 4, 2012 at 9:56 PM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.