Where Is the Engine Control Module (ECM) on a 1987 Mercedes Benz E-Class 300?

1987 MERCEDES BENZ 300E
150 MILES
Avatar
AMAHMUD90
  • MEMBER
  • 2 POSTS
I'm trying to locate the Engine Control Module on a 1987 Mercedes Benz E-Class 300. The car starts when cold then dies when it gets hotter. Sometimes there is a ticking sound as if it is the relay but we've been advised that it could be the ECM, which so far sounds like the correct choice or repair.
Sep 25, 2011 at 6:28 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
JACOBANDNICKOLAS
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 110,190 POSTS
Behind the left kick panel
Sep 25, 2011 at 6:31 PM
Advertisement
Avatar
AMAHMUD90
  • MEMBER
  • 2 POSTS
Under the kick panel or under the dash?
I tried taking a peek under the kick panel before I remove it but I only see wires running through it to another location under the chair. Unless they're being routed through the ECM to another location and I cannot be sure of that until I remove the kick panel. Any quick idea on how to remove the kick panel? also. Thank you very much for your help.
Sep 25, 2011 at 7:26 PM
Avatar
JACOBANDNICKOLAS
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 110,190 POSTS
I looked it up and that is where it is to be. The kick panel is where your foot would rest against the side of the floor.
Sep 25, 2011 at 8:39 PM