how to change the transmition selector cablechanging the transmition selector cable
Nov 22, 2010 at 8:35 AM
transmition
1987 CHEVROLET CELEBRITY
MIBI
- MEMBER
- 11 POSTS
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Attached are 2 different cable types. Our database does not have any instruction on the removal/installation so you would have to rely on the diagrams to understand what needs to be removed to get the cable out.
Images (Click to enlarge)
Nov 22, 2010 at 10:58 AM
Advertisement
Thank you, but this doe not show how it has to be done on my Chevy Celebrity "automatic" the cable goes to the wheel to the gear lever
Nov 22, 2010 at 11:20 AM
Fig 3 (2nd diagram) shows the colun shift cable that you are referring to.
Cable housing is held by retainers (clips) that have to be removed. At both end of cable, cotter pins with washers are usd. They have to be removed as well. After that you need to maneuver the cable out.
Cable housing is held by retainers (clips) that have to be removed. At both end of cable, cotter pins with washers are usd. They have to be removed as well. After that you need to maneuver the cable out.
Nov 22, 2010 at 11:34 AM