Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
HMAC300
AUTOMOTIVE REPAIR CONTRIBUTOR
48,601 POSTS
if you have spark to other ones then you need to checkthat coil pack and or spark plug wire. if you havean ohm meter you can check the plug wire it should be 5000 ohms per foot. if they are high then your plug wire is bad.
Dec 17, 2010 at 6:30 PM
Advertisement
RASMATAZ
AUTOMOTIVE REPAIR CONTRIBUTOR
75,992 POSTS
If wire and coil pack checks out -inspect and test the crankshaft positioning sensor-
Dec 17, 2010 at 6:53 PM
LAT
MEMBER
44 POSTS
thank you plug wire is ok / coil pack how do you check it
Dec 17, 2010 at 11:25 PM
HMAC300
AUTOMOTIVE REPAIR CONTRIBUTOR
48,601 POSTS
go to the DIY section on site and it will go through step by step instructions.