If you have spark to other ones then you need to checkthat coil pack and or spark plug wire. If you havean ohm meter you can check the plug wire it should be 5000 ohms per foot. If they are high then your plug wire is bad.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, December 17th, 2010 AT 6:30 PM
RASMATAZ
MECHANIC
75,992 POSTS
If wire and coil pack checks out -inspect and test the crankshaft positioning sensor-
Was this
answer
helpful?
Yes
No
+1
Friday, December 17th, 2010 AT 6:53 PM
LAT
MEMBER
44 POSTS
Thank you plug wire is ok / coil pack how do you check it
Was this
answer
helpful?
Yes
No
Friday, December 17th, 2010 AT 11:25 PM
HMAC300
MECHANIC
48,601 POSTS
Go to the DIY section on site and it will go through step by step instructions.