How do I get the trouble codes from my on board.

ANONYMOUS

MEMBER
1987 BUICK SKYLARK

How do I get the trouble codes from my on board conputer

Sunday, March 10th, 2013 AT 3:00 AM

1 Reply

HMAC300

MECHANIC
48,601 POSTS

Cross A&B with a paper clip and watch theservice engine light flash with key on. It will flash in series of 3 like1 then 2 that is code 12 the A&B is on the aldl below dash lh side. Come to the site here and look unde rOBD1

Please login or register to post a reply.

1989 Buick Skylark Pcm/ecu Changed

Computer Problem 1989 Buick Skylark 6 Cyl Front Wheel Drive Automatic Buick Skylark, 3.3lt V6 1989 Got High Idlespeed And "engine...

Asked by dharry ·

1 ANSWER

1989

BUICK SKYLARK

1990 Buick Skylark Timing Chain + Bent Valve

1990 Buick Skylark My Friend Has A 1990 Buick Skylark. The Timing Belt/chain Broke And We Were Wondering If The Valves Can Be...

Asked by kidroll ·

1 ANSWER

1990

BUICK SKYLARK

1970 Buick Skylark Rebuild Motor

I Just Rebuilt My Motor 1970buick 350, I Was Wondering About Break In. There Is No Water In Engine, Should I Run It With Out Thermostat. How...

Asked by cordellpup ·

2 ANSWERS

1970

BUICK SKYLARK

Backfire Through Throttle Body Buick Skylark 2.5

When Its Cool It Runs Fine After Warming Up To Much Throttle And It Starts Backfiring Floor It And It Pops A Few Times And Comes Out Of It

Asked by chevelless68 ·

2 ANSWERS

1989

BUICK SKYLARK

1970 Skylark Engine Mount Placement

Will An Oldsmobile 455 Engine Bolt On To A 1970 Buick Skylark?

Asked by PlasmaJack ·

1 ANSWER

1970

BUICK SKYLARK

Sponsored links

Ask a Car Question. It's Free!

How do I get the trouble codes from my on board.

1 Reply

Please login or register to post a reply.

Related Engine Computer Read Code Content

1989 Buick Skylark Pcm/ecu Changed

1990 Buick Skylark Timing Chain + Bent Valve

1970 Buick Skylark Rebuild Motor

Backfire Through Throttle Body Buick Skylark 2.5

1970 Skylark Engine Mount Placement

Sponsored links