my heater blows sporadically and eventually grinds to a stop, only to start up again later, then grinds to a stop again.
Dec 31, 2010 at 11:32 AM
heating system
ALAN MOORE
- MEMBER
- 1 POST
Souds like the blower motor, replace it like this:
HEATER BLOWER MOTOR
Removal
From engine compartment, disconnect battery negative cable. Pull back rubber strip and remove
retaining bolts from upper heater wall. Lift up blower plates and pull off plugs. Disconnect retaining
straps and remove blower motor.
Installation
To install, reverse removal procedure.
HEATER BLOWER MOTOR
Removal
From engine compartment, disconnect battery negative cable. Pull back rubber strip and remove
retaining bolts from upper heater wall. Lift up blower plates and pull off plugs. Disconnect retaining
straps and remove blower motor.
Installation
To install, reverse removal procedure.
Dec 31, 2010 at 11:42 AM