what would cause a 22re motor to dump water out of the number 3 cylinder after a top end rebuild due to water and oil mixing?
Jan 1, 2015 at 8:27 PM
water oil mixing
1986 TOYOTA 4RUNNER
JACOBTK
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Hello,
Most common cause is a leaking cylinder head gasket, but if this is after a repair that was done for the same reason, the next suspect would be a crack in the cylinder head. Was the head checked for cracks? The last thing would be a crack in the cylinder wall, but that isn't common.
https://www.2carpros.com/articles/coolantantifreeze-in-the-engine-oil
Was the head checked for flatness?
Please let us know what happens.
Most common cause is a leaking cylinder head gasket, but if this is after a repair that was done for the same reason, the next suspect would be a crack in the cylinder head. Was the head checked for cracks? The last thing would be a crack in the cylinder wall, but that isn't common.
https://www.2carpros.com/articles/coolantantifreeze-in-the-engine-oil
Was the head checked for flatness?
Please let us know what happens.
May 1, 2017 at 10:24 PM
Advertisement