SPONSORED LINKS

Idling Problem

Tiny
ROBERTO1
  • MEMBER
  • 1986 PONTIAC FIERO
  • 4 CYL
  • 2WD
  • MANUAL
  • 97,696 MILES
Hey, My fiero idles very high at 2.5 rpm, it used to idle at 1.5. It won't idle down for about 10 mins, and if I drive it before it idles down it gets really shaky and doesn't drive good. Any tips?
Saturday, September 10th, 2011 AT 3:10 PM

6 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
Check for vacuum leaks. If the check engine light is on, have the computer scanned for trouble codes. (I believe they had the OBD1 in 86).
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, September 10th, 2011 AT 5:31 PM
Tiny
ROBERTO1
  • MEMBER
  • 9 POSTS
The check engine light isn't on and after I've drove it and turn it off for about an hour, I start it and it idles high at 2.5 rpm but then I press the gas and it goes down to 1.5 rpm, do you think it could be the idle control valve?
Was this
answer
helpful?
Yes
No
Saturday, September 10th, 2011 AT 7:00 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
It could be. It could be a simple vacuum leak too. Please bear with me. It's is difficult when the car isn't in front of me. I would recommend checking for vacuum leaks. If you don't find any, then I would move to the control valve.
Was this
answer
helpful?
Yes
No
Saturday, September 10th, 2011 AT 7:21 PM
Tiny
ROBERTO1
  • MEMBER
  • 9 POSTS
Yeah ill do that and ill tell you what I find, thanks a lot I appreciate your help
Was this
answer
helpful?
Yes
No
Saturday, September 10th, 2011 AT 7:24 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
I just hope I provided help. It is hard to do when I'm not right there with you. Take care and let me know.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, September 10th, 2011 AT 7:35 PM
Tiny
ROBERTO1
  • MEMBER
  • 9 POSTS
Ok, I checked the whole engine, no vacuum leaks, and I was just wondering, how do you clean the idle control valve? And how much is a new sensor?
Was this
answer
helpful?
Yes
No
+1
Monday, September 19th, 2011 AT 8:45 PM

Please login or register to post a reply.

Related Engine Stall At Idle Content

Engine Stalls After Dead or New Battery
GUIDE
Engine Stalls After Dead or New Battery
So you installed a new battery and now the engine stalls? You have done nothing wrong because believe it or not this is normal. The engine computer has a learning cycle...
VIEW MORE

Sponsored links