Adjusting hand brake
Feb 17, 2013 at 1:20 PM
1986 MITSUBISHI TRUCK
ANONYMOUS
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
1. Service brake adjustment must be accurate before making parking brake adjustment. Fully release parking brake, and allow slack in rear cable to prevent brake shoe drag.
2. Adjust turnbuckle for 2WD models (turn adjusting nut on equalizer for 4WD models) to obtain a brake lever stroke of 16 17 notches with a 66 lbs. (29.9 kg) setting force.
3. On 2WD models, balancer must be parallel with center line of vehicle. On 4WD models, the equalizer and joint must be at right angles to each other.
2. Adjust turnbuckle for 2WD models (turn adjusting nut on equalizer for 4WD models) to obtain a brake lever stroke of 16 17 notches with a 66 lbs. (29.9 kg) setting force.
3. On 2WD models, balancer must be parallel with center line of vehicle. On 4WD models, the equalizer and joint must be at right angles to each other.
Feb 17, 2013 at 4:24 PM
Advertisement