how do i reset the egr light on the dash
Dec 15, 2010 at 12:15 AM
egr dash light
1986 MAZDA B2000
VALZINK
- MEMBER
- 4 POSTS
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
EGR WARNING LIGHT RESET - PROCEDURE
Warning light will come on at 60,000 miles, indicating EGR system should be serviced. To disable warning light (after service), locate Black wire and Green wire connectors under dash (above and left of fuse box). Unplug connector, and leave it disconnected. Light will not come on again.
Warning light will come on at 60,000 miles, indicating EGR system should be serviced. To disable warning light (after service), locate Black wire and Green wire connectors under dash (above and left of fuse box). Unplug connector, and leave it disconnected. Light will not come on again.
Dec 15, 2010 at 12:26 AM
Advertisement