1986 Ford Ranger Performance Issues

107,289 MILES • 2.9L • 4 CYL • 2WD • MANUAL
Avatar
MARINE75
  • MEMBER
  • 2 POSTS
A pipe towards the front of my engine is releasing alot of air pressure and I'm not sure if a hose is supposed to be connected to it, or where it would connect to. Any advice would help.
Dec 8, 2014 at 2:22 PM
Advertisement
Avatar
CARADIODOC
  • ✓Experienced Mechanic
  • 34,407 POSTS
You're going to either have to have a live person look at it or try to post a photo of the pipe. Can you determine what it is hooked to? There's no way we can see or hear what's happening over a computer. Is there any unusual noise or hissing associated with the air? Is it a metal or rubber pipe? How large in diameter is it?
Dec 8, 2014 at 2:40 PM
Avatar
MARINE75
  • MEMBER
  • 2 POSTS
I hope this picture helps more.
Dec 9, 2014 at 5:54 AM
Avatar
CJ MEDEVAC
  • ✓Experienced Mechanic
  • 11,000 POSTS
I MADE IT BIGGER AND A LITTLE BRIGHTER FOR YOU DOC!

NO NEED IN THANKING ME, I KNOW WE'RE SORTA TIGHT!

THE MEDIC
Dec 9, 2014 at 6:18 AM
Avatar
CARADIODOC
  • ✓Experienced Mechanic
  • 34,407 POSTS
That appears to be part of the EGR system. One pipe will attach to the exhaust system and will make a lot of noise if it has a leak in it. The small fitting should have a vacuum hose connected to it. There's a vacuum hose routing diagram on a sticker under the hood that will show where that hose goes to.
Dec 9, 2014 at 1:16 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle