can not move the heater a/c switch lever on 1985 Olds Cutlas.
Feb 23, 2011 at 3:50 PM
Heater switch
CABOTHINES
- MEMBER
- 6 POSTS
Advertisement
It's connected through a cable to either the door is jammed or the cable is jammed.
Feb 23, 2011 at 4:12 PM
This is not the hot cold lever. That works fine. It is the upper lever that turns on the A/c or the heater or defroster. It moves just a little bit than stops !!!!
Help
Help
Feb 23, 2011 at 4:26 PM
That should be a rotary vacuum switch. you will have to pull out the control assembly and see what the problem is.
Feb 23, 2011 at 4:31 PM
How do get the control assembly out?
Feb 23, 2011 at 4:36 PM
VEHICLES LESS AUTOMATIC TEMPERATURE CONTROL
1. Disconnect battery ground cable.
2. Remove instrument panel trim panel(s) to expose control unit retaining screws.
3. Remove control unit retaining screws, then carefully draw unit out of instrument panel.
4. Disconnect vacuum and electrical connections, then disconnect temperature control cable.
5. Reverse procedure to install.
1. Disconnect battery ground cable.
2. Remove instrument panel trim panel(s) to expose control unit retaining screws.
3. Remove control unit retaining screws, then carefully draw unit out of instrument panel.
4. Disconnect vacuum and electrical connections, then disconnect temperature control cable.
5. Reverse procedure to install.
Feb 23, 2011 at 4:38 PM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.