1985 Chevrolet Truck transmission

Tiny
LIT549
  • MEMBER
  • 1985 CHEVROLET TRUCK
  • 5.7L
  • V8
  • 2WD
  • AUTOMATIC
  • 99,000 MILES
I am changing engines and I noticed my torque converter is very loose in the pump. How much play is normal? It seems to me the bushings in pump and stator are bad. Trans only has 16000miles since overhaul. And it IS seated all the way in the pump. Can that much play in bushings cause a vibration?
Tuesday, February 3rd, 2015 AT 2:08 PM

5 Replies

Tiny
WRENCHTECH
  • MECHANIC
  • 20,758 POSTS
It's probably not seated all the way. Once it is fully seated and bolted to the flywheel, it isn't going to move.
Was this
answer
helpful?
Yes
No
Tuesday, February 3rd, 2015 AT 3:10 PM
Tiny
LIT549
  • MEMBER
  • 3 POSTS
350c converter slop
Acually it IS seated properly.I know once ya bolt it up it can't move but what about it causing a vibration?
Was this
answer
helpful?
Yes
No
Tuesday, February 3rd, 2015 AT 3:16 PM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,758 POSTS
I wouldn't worry about that.
Was this
answer
helpful?
Yes
No
Tuesday, February 3rd, 2015 AT 3:20 PM
Tiny
LIT549
  • MEMBER
  • 3 POSTS
Thank you.
Was this
answer
helpful?
Yes
No
Tuesday, February 3rd, 2015 AT 3:22 PM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,758 POSTS
You're welcome
Was this
answer
helpful?
Yes
No
Tuesday, February 3rd, 2015 AT 3:25 PM

Please login or register to post a reply.

Sponsored links