SPONSORED LINKS

1984 Ford Bronco ignition

Tiny
CRAZYPEOPLEME
  • MEMBER
  • 1984 FORD BRONCO
  • 5.0L
  • V8
  • 4WD
  • AUTOMATIC
When I crank the bronco it starts when I let go of the key it shuts off.I put new tumbler the box under the dash still shuts off when u release the key
Thursday, February 20th, 2014 AT 3:28 PM

2 Replies

Tiny
CARADIODOC
  • MECHANIC
  • 33,873 POSTS
Sounds like you have a defective ignition resistor. A tap on the starter solenoid bypasses it during cranking. There were two different coil designs used in '84. I'm not sure what they used for a ballast resistor or resistor wire, if anything. Measure the voltage on the coil's positive terminal with the ignition switch on. If you find 0 volts, follow that circuit back to determine where it's getting lost.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, February 20th, 2014 AT 4:28 PM
Tiny
CJ MEDEVAC
  • MECHANIC
  • 11,004 POSTS
CHECK YOUR FUSES TOO!

THIS JEEP CJ ANSWER I GAVE WILL EXPLAIN WHY IT "RUNS" WHILE THE KEY IS IN THE STARTING POSITION..........YOURS WORKS SIMILAR

https://www.2carpros.com/questions/jeep-cj5-1976-jeep-cj5-voltage-drop-at-coil

KEEP US POSTED.....OR IF YOU ARE STILL IN NEED....WE TRY HARD!

THE MEDIC
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
Thursday, February 20th, 2014 AT 4:59 PM

Please login or register to post a reply.

Related Ignition Switch Key Content

VIEW MORE

Sponsored links