how do you pull out headlight switch
Dec 23, 2010 at 1:14 AM
headlight switch on 82 bronco
1982 FORD BRONCO
THULI
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Disconnect battery ground cable.
Remove ****s from headlight switch, windshield wiper switch and fog light switch (if equipped). Use a suitable hook tool to release each **** lock tab.
Remove steering column shroud, then the cluster finish panel assembly, Fig. 5.
Remove switch attaching nut, Fig. 5.
Disconnect electrical connector from switch and remove switch from vehicle.
Reverse procedure to install.
Remove ****s from headlight switch, windshield wiper switch and fog light switch (if equipped). Use a suitable hook tool to release each **** lock tab.
Remove steering column shroud, then the cluster finish panel assembly, Fig. 5.
Remove switch attaching nut, Fig. 5.
Disconnect electrical connector from switch and remove switch from vehicle.
Reverse procedure to install.
Image (Click to enlarge)
Dec 23, 2010 at 1:32 AM
Advertisement