Thursday, December 23rd, 2010 AT 1:14 AM
THULI
- MEMBER
- 1982 FORD BRONCO
- V8
How do you pull out headlight switch
Headlight switch on 82 Bronco
1 Reply
RASMATAZ
- MECHANIC
- 75,992 POSTS
Disconnect battery ground cable.
Remove ****s from headlight switch, windshield wiper switch and fog light switch (if equipped). Use a suitable hook tool to release each **** lock tab.
Remove steering column shroud, then the cluster finish panel assembly, Fig. 5.
Remove switch attaching nut, Fig. 5.
Disconnect electrical connector from switch and remove switch from vehicle.
Reverse procedure to install.
Remove ****s from headlight switch, windshield wiper switch and fog light switch (if equipped). Use a suitable hook tool to release each **** lock tab.
Remove steering column shroud, then the cluster finish panel assembly, Fig. 5.
Remove switch attaching nut, Fig. 5.
Disconnect electrical connector from switch and remove switch from vehicle.
Reverse procedure to install.
Image (Click to make bigger)
SPONSORED LINKS
Was this helpful?
Yes
No
Thursday, December 23rd, 2010 AT 1:32 AM
Related Headlight Wiring Content
Sponsored links
SPONSORED LINKS
Have a Dim Headlight? - Try Replacing This!
